User's Manual

MG7310 Cable Modem User Manual

802.11n Mode:

Set this parameter to OFF to force 802.11g mode (required to enable WEP). The

default value is Auto.

WEP Encryption:

Disabled and grayed out by default. If you need WEP Encryption, set 802.11n Mode

to OFF to un-gray out, and then Enable this parameter.

Network Key 1 thru Network Key 4:

When WEP encryption is enabled, sets the static WEP keys. Enter 5 ASCII

characters or 10 hexadecimal digits for a 64-bit key. Enter 13 ASCII characters or 26

hexadecimal digits for a 128-bit key.

Current Network Key:

This selects the Network Key used for transmissions. Select 1 - 4 (default 1).

PassPhrase:

Enter a 10 or 26 character string, then press Generate WEP Keys to generate

Network Keys 1 - 4.

5.4.4 Guest

Choose Wireless > Guest to display the following page.

Figure 30 Guest configuration

The page allows you to configure a secondary guest network on the wireless

interface.