User's Manual

MG7310 Cable Modem User Manual

days and start and end times of the access. Next, enter the Protocols to allow

(choose both if you're not sure). Finally, select Enable and click Save to activate the

entry.

Note that you can Disable the entry temporarily if you may want to re-Enable it later.

5.6 VPN

Choose VPN and the submenus of VPN are shown as below.

Figure 39 Submenus of VPN

5.6.1 IPSec

Choose VPN > IPSec to display the following page.

Figure 40 IPSec configuration

This page will show the status of configured tunnels.

Tunnel:

This is a pull-down list of VPN Names defined below. Select the specific VPN tunnel

to configure.