User's Manual

MG7310 Cable Modem User Manual
5
Indicator Color Status Description
Blink
Data is being transmitted through the
wireless interface.
Off WLAN is disabled.
WPS Green
On
Connection succeeds under Wi-Fi
Protected Setup.
Blink
Negotiation is in progress under Wi-Fi
Protected Setup.
Off Wi-Fi Protected Setup is disabled.
3.1.2 Rear Panel
The following table describes the interfaces or the buttons on the rear panel.
Interface Description
Antenna The antenna interface, for connecting the antennas.
Cable RF cable port, for connecting HFC cable.
Reset
Press the button for at least 10 second and then release it. System
restores the factory default settings.
Eth 4~1
RJ-45 port, for connecting the router to a PC or another network
device.
Power Power interface, for connecting the power adapter.
Warning:
Do not press the Reset button unless you want to clear the current settings. The
Reset button is in a small circular hole on the rear panel. If you want to restore the
default settings, please press the Reset button gently for 10 second with a fine
needle inserted into the hole and then release the button. The system reboots and
returns to the factory defaults.
3.2 Hardware Installation