Manual

Routine Maintenance Overview Checklist
Recommended service to be performed at each running time interval noted
AnnuallyBiweeklyWeeklyDailyCalendar Time using 8 hour Running
Time rate per day
2,0001,500100050080408Running Time-Hours
X 1Check that Actuator Platen Area is Clean
XMonitor Filter Indicators
XCheck Hoses/Cables/Connectors
XCheck Crosshead/Lifts/Supports
XCheck Actuator to be Dry
XCheck Hydraulic Service Manifold
XCheck Lift Seal Condition to be Dry
XCheck Lock Seal Condition to be Dry
XBionix Lubricate Axial/Torsional Spline
(75-100 hrs)
XCheck Actuator
XLabel Inspection
Crosshead/Load Frame
MTSMTSMTSMTSMTS 2Check Crosshead/Lifts/Supports
MTSMTSMTSMTSMTSLift Seal Condition is Dry
1 Symbol denotes services performed by equipment operators. Most of these procedures involve visual
checks that should not interfere with test system operation. These checks are also completed by trained
field service engineers on each Routine Maintenance visit.
2 Symbol denotes service performed by trained field service engineers as part of an MTS Routine Maintenance
plan. Some of these procedures require special service tools and/or specific service training to complete.
144 | MTS Landmark Test System Operation
Maintenance