Owner's manual

Series 322 Load Unit Introduction
11
Introduction
Load Unit: Overview
The load unit is the primary structure for most materials testing. It is a stand-
alone testing unit. The load unit consists of the load frame plus additional parts,
such as hydraulic crosshead lifts and control modules. Load units come in
different sizes and shapes. The following illustration shows typical load units
with common accessories.
The load units are designed for testing materials. They can perform tension and
compression tests, fatigue and fracture mechanics tests, as well as other tests.
MTS manufactures a variety of grips, mounting fixtures, test area guards, and
environmental chambers that can be used with the load unit.
Model 318
Model 322
Model 359
Typical Load Units