Owner's manual

Series 322 Load Unit

Install the Crosshead Assembly

Installation

Install the Crosshead Assembly

There is a possibility of the crosshead assembly suddenly dropping —

You can be seriously hurt and your assembly badly damaged.

To reduce the hazards in this procedure, observe the following precautions:

• Always lift the crosshead assembly using the lifting eyes screwed into the

crosshead — never with eyes screwed into the columns.

• Never wrap chains around the crosshead or columns or actuator.

• Smoothly lift, move, and lower the crosshead assembly to avoid shocks that

could break the chain, crane, or lifting eyes.

• Lift the crosshead assembly no higher than is needed to install it.

Note Lightly lube all threads with Molykote G-n paste.