Software Owner's manual

Encoder SettingsApplication
Type = UnsignedType = Signed
N/APhysical Zero Position at Mid
Stroke (device dependent)
N/AVelocity from Device
(Temposonics R option)
Note:
The graphs shown above represent a 12-bit linear device.
Encoder SettingsEncoder Signal RangeApplication
Position
Filter
Turns
Counting
TypePower-up Signal range
Operating Signal range
YesTrueUnsignedPosition-Limited
Rotation
Power-up signal
range: 0 to 360
degrees
See NoteFalseUnsignedUnlimited Rotation
Operating-signal
range: 0 to 360
degrees
MTS Series 793 Utility Software 67
HWI Hardware Settings