Operating instructions

Fuel
– Prefilter
– Differential pressure gauge - Check and adjust‐
ment 91
– Draining 92
– Filter element replacement 95
– Treatment system
– Troubleshooting 61
– treatment system
– Shutdown 58
– Switching on 53
Fuel filter
– Replacement 89
Fuel prefilter
– Differential pressure gauge
– Check and adjustment 91
– Draining 92
– Filter element
– Replacement 95
Fuel prefilter – Flushing 93
Fuel system – Venting 88
Fuel treatment system
– Putting into operation 50
– Shutdown 58
– Switching on 53
G
General conditions 7
H
HT coolant pump
– Relief bore check 119
I
Injector
– Removal and installation 86
Injector – Replacement 85
Installation locations for SOLAS shielding 67
Intercooler – Checking condensate drain line for coolant
discharge and obstruction 97
M
Maintenance work
– Safety regulations 11
MTU contact persons 142
O
Operation
– Safety regulations 10
Operational checks 52
P
Personnel and organizational requirements 8
Plant
– Cleaning 59
Product description 19
Pump capacity
– Check 128
Putting into operation
– Fuel treatment system 50
Putting the engine into operation after scheduled out-of-
service period 47
R
Raw water pump – Relief bore check 122
Repair work
– Safety regulations 11
S
Safety instructions 17
Safety regulations 10, 11
Sensors, actuators and injectors
– Overview 27
Service partners 142
SOLAS shielding
– Installation 66
SOLAS shielding as per MTN 5233 – Installation 65
Starter
– Condition check 101
Starting the engine 54
Startup
– Safety regulations 10
Stopping the engine 55
T
Tasks
– After extended out-of-service periods 48
Tasks after extended out-of-service periods (>3 weeks)
48
Transport 9
Troubleshooting 62
– Fuel treatment system 61
V
Valve clearance – Check and adjustment 81
W
Water drain valve
– Check 125
Water level probe (3-in-1 rod electrode)
– Check 127
Wiring - engine
– Check 131
M015650/04E 2012-02 | Appendix B | 147
DCL-ID: 0000014355 - 003