Operating instructions

ManualsBrandsMTU ManualsAutomotive12 V 2000 M72

7.6.2 Injector – Removal and installation

Preconditions

☑ Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use Part No. Qty.

Socket wrench

0005896803/00 1

Puller

F6790629 1

Double box wrench

F30011450 1

Open end wrench bit

F30025897 1

Box wrench adapter

F30451199 1

Alignment device

F6790507 1

Grease (Kluthe Hakuform 30-10/Emulgier)

X00029933 1

Engine oil

WARNING

Fuels are combustible.

Risk of fire and explosion!

• Avoid open flames, electrical sparks and ignition sources.

• Do not smoke.

Preparatory steps

1. Close fuel supply to engine.

2. Remove cylinder head cover (→ Page 84).

Removing injector

1. Remove HP line (5) using socket wrench.

2. Disconnect injector cable (4).

3. Remove screw (2).

4. Take off hold-down clamp (3).

5. Remove injector (1) with puller.

6. Remove O-rings from injector.

7. Mask all connections and bores or seal with

suitable plugs.

86 | Task Description | M015650/04E 2012-02

TIM-ID: 0000004650 - 002