Specifications

3815 Oregon Street • Oshkosh, WI 54902 • 1-800-872-7697 • Phone [phone] • Fax [phone]
909 Perkins Drive • Mukwonago, WI 53149 • Phone [phone] • Fax [phone]
World Headquarters
Baldor Electric Company • P
.O. Box 2400 • Fort Smith, AR 72902-2400 U.S.A.
Phone [phone] • Fax [phone] • International Fax [phone]
www.baldor.com
© Baldor Electric Company Printed in the U.S.A.
FM2491E 5/05 FARR 5000
Insulation Specification
(applicable to Level 1, 2 & 3 only)
Sound Deadening Material specifications:
1. Material is an inorganic glass fiber pre-formed into boards and bonded by a thermosetting resin
2.
Density of materials is a 3.0 PCF (48 kg/cm3)
3. Thickness of materials is 3" on Level 1 & 2 Enclosures. Thickness of materials is 6" on Level 3 Enclosures
4. Surface burning characteristics meet the requirements of NFPA 90A & 90B
5. Moisture absorption: (ASTM C553) less than 5% by weight when exposed to air at 120˚F (49˚C) and 95% humidity for 96 hours
6. Shrinkage: (ASTM C356) will exhibit less than 0.3% linear shrinkage
These specifications are subject to change without notice.
Copyright Baldor Generators.
This information is confidential and proprietary to Baldor Generators
Paint Specification - applicable to all Enclosures
(Detailed paint specification follows on page 2 of Appendix F)
Powder Paint System consisting of the following:
1. Three stage wash system with Phosphate treatment
2.
Application of sealant
3. Electrostatically applied enamel based powder paint 1.5 to 2.5 milthickness
4. Baked at 400o for 15 mintues
5. Almond is our standard color
(other colors available see pricing schedule for cost)
COORDINATE FINAL COLOR WITH
OWNER PER 263213D,2.12,A
* PROVIDE ENGINE INFORMATION SIMILAR TO NATURAL GAS SUBMITTAL
* PROVIDE EMISSIONS INFORMATION SIMILAR TO NATURAL GAS SUBMITTAL
Almond is our standard color. Please
notify PMT before final approval