Specifications

InteliGen
NT
Communication modules and
PCtools
 I-CR – CAN repeater module
 IG-IB – Internet bridge
 I-LB+ – Local bridge
 I-CB – ECU communication bridge
 InteliMonitor – PC monitoring tool
 InteliSupervisor – PC tool for Gen-set
or machines fleet management
 WinScope – Special graphical controllers‘ monitoringsoftware
 GenConfig – PC configuration tool
Extension modules and
remotedisplays
 up to 4× I-AOUT8 – Analog output extension module
 IGL-RA15 – Remote annunciator
 up to 4× IGS-PTM – Analog/binary input/output module
 up to 10× IS-AIN8 – Analog input module
 up to 10× IS-AIN8TC – Analogue input
module for thermocouples
 up to 6× IS-BIN16/8 – Binary input/output module
 up to 5× InteliVision 8 – Controller colour display unit
 IG-Display LT GC – Additional remote display
Upgrade kits
 IGS-NT-LSM+PMS dongle:
• Enables Multiple isolated parallel or
multiple parallel with mains
• Power management operation (with CAN bus)
• Digital Load Sharing
• Digital VAr Sharing
 IGS-NT-miniCHP dongle:
• More PLC functions
 IGS-NT-LSM+PMS+miniCHP dongle:
• Combination of the both dongles
HW modification codes
 Order code IG-NT (LT) (GC) (Marine) or
IG-NTC (LT) (GC) (Marine)
LT = Low Temperature; display equipped with heating foil for
operation down to –40 °C
GC = Graphical Characters; one additional font (12 × 12, e.g.
Chinese or Korean) can be used on the display
Marine = Type approved version for Marine
Typical application
RENTAL SETS
Description:
 Containerized rental gen-sets can
be used for maintenance of power
lines without interruption of power
delivery to end consumer.
 Gen-sets are connected one-by-one to
mains at the consumer’s end and manually
loaded. Power line is then manually
disconnected and consumer is powered
from generators running in parallel.
 The group of gen-sets is reverse
synchronized to mains after finalization of
maintenance on power line. InteliMains
NT
keeps generators and mains in synchronism
enabling manual reconnection to power line.
 InteliMains
NT
is built in a small
shock proof suitcase.
 Interconnection of containers is done by
color coded not-interchangeable connectors.
 Each gen-set can be used in Stand-by,
Single parallel to mains and Multiple
parallel modes according to the
position of Mode selector switch.
 Frequency selector enables switching
between 50Hz / 230V and 60Hz / 277V mains.
Scope of supply:
 3× InteliGen
NT
 3× IGS-NT-LSM+PMS dongle
 3× IG-AVRi
 3× IG-AVRi-TRANS/LV
 1× InteliMains
NT
IG-NT
IM-NT
IG-NT
IG-NT
LOAD
Visit www.comap.cz to see
more typical applications.