Specifications
Features and specification are subject to change without prior notice 20 07 -11
ComAp, spol. s r. o.
Czech Republic
Phone: + 420 246 012 111
Fax: + 420 266 316 647
E-mail: info@comap.cz
Internet: www.comap.cz
MANUFACTURER: LOCAL DISTRIBUTOR / PARTNER:
Screens examples
INTELIVISION
RS485/RS232* (1)
INTELIVISION
1
1
IS-NT-BB / IG-NT / IG-NTC / IG-EE / IG-EEC
IGS-NT
INTELIVISION
INTELIVISION
CAN
RS485/RS232* (2)
2
IS-NT-BB
1
INTELIVISION
INTELIVISION
CAN
IGS-NT
2
3
4
2
3
4
4
2
3
4
4
2
3
2
3
2
2
3
4
IG-NTC / IG-EEC
IG-NT / IG-EE
*via RS232 port only one InteliVision unit can be connected
INTELIVISION
ID-DCU
INTELIVISION
RS 232
CAN
ID-DCU
CAN
INTELIVISION
Features
8" colour TFT display with
resolution of 800 × 600 pixels
Controlled by active buttons
Comes with new TRENDS
monitoring screen
Windows CE operating system
Same language support as
InteliGen
NT
/ InteliSys
NT
and InteliDrive
Screen configuration by customer –
export to XML format with subsequent
manual screen modification and import
back to the controller (as IS-Display)
This display gives complete access to
all control and monitoring functions of
InteliGen
NT
/ InteliSys
NT
and InteliDrive
Intended for connection to ONE
controller (InteliGen
NT
/ InteliSys
NT
or InteliDrive type)
The same dimensions as IS-Display /
InteliSys
NT
(including cut out dimensions)
It is possible to mount IS-NT-BB
to the rear side of InteliVision
Can be used as a replacement for
IG-Display, IS-Display or I-RD-CAN
Connection to a controller via
RS232/485 and CAN bus
Auto configuration based on controller
application (as IS-Display)
Designed to be mounted in both
monitoring and engine room
Operating temperature from
–20 to + 70°C (–4/158°F)
CE certification
Sealed to IP65
InteliVision with InteliDrive controllers
(all possible connections)
InteliVision with IGS-NT controllers
(all possible connections)