Specifications

WORLD HEADQUARTERS
Baldor Electric Company P. O. Box 2400 Fort Smith, AR 72902-2400 U.S.A.
Phone (479) 646-4711 Fax (479) 648-5792 International Fax (479) 648-5895
www.baldor.com
© Baldor Electric Company Printed in U.S.A.
FM24703D 3/08 CMB 2000
Additional Standard Genset Features Available Accessories and Options
Additional Standard Genset Features Available Accessories and Options
Optional Agency Approvals
Optional Agency Approvals
Weight and Dimensions (Open Unit)
Weight and Dimensions (Open Unit)
Open Unit
q Industrial Silencer q Residential Silencer
q Critical Silencer q Super Critical Silencer
q Exhaust Flex Pipe q Rain Cap
q Radiator Duct Flange
Enclosed Units
q Weather Resistant Enclosure
q Sound Attenuated w/Internal Critical Silencer
q ISO Container q Walk-In Enclosure
Alternator Accessories
q PMG Exciter and AVR Upgrade
q Alternator Space Heater
q Exciter Field Circuit Breaker
q Alternator Drip Shield
Genset Accessories
q Voltage Adjust Potentiometer
q Starting Battery
Battery Charger qAuto/Float
Auto/Float Equalize Timer qManual qAutomatic
q Battery Heater
q Engine Coolant Heater
q Oil & Coolant Drain Valves (Engine/Radiator)
q Oil & Coolant Drain Extended to Base
Main Output Breaker qWall Mount qUnit Mount
Transfer Switch qManual q Automatic
Control Panel
q Remote Annunciator
q Remote Communications
q Remote E-Stop
Fuel System and Sub-Base Fuel Tank
Sub-Base Tank qSingle Wall qDouble Wall
q UL142 Double Wall with Containment
Tank Run Time @ 100% Load
q 12-16 Hours q24-36 Hours
q Flex Fuel Line
q Primary Fuel / Water Separator
Vibration Isolators
Location qUnder Tank qBetween Tank
q Elastomer Isolator q Pad Isolator
q Standard Spring q Spring for Seismic Zone 4
4 Formed Steel Sub-Base
4 Integral Vibration Isolation
4 Sub-Base Lifting Eyes
4 Unit Mounted Radiator
4 Engine Mounted Fan
4 Radiator Core and Fan Guards
4 Battery Charging Alternator
4 Battery Rack and Cables
4 Unit Mounted Control Panel
4 Spin-On Filters for Oil and Fuel
4 Enamel Finish
4 One Set - Operation / Maintenance Manual
4 Factory Tested Prior to Shipment
4 Limited Warranty
q UL2200 (Review Option Availability)
q NFPA110 (Request Remote Annunciator)
Weight – Wet lb(kg) 7449 (2895)
Overall Dimensions Length x Width x Height
inches 137 x 60 x 75
mm 3480 x 1524 x 1905
Note: Drawing is provided for reference only. Use
engineering outline for installation planning
These options are included