Technical data

电子元器件可选项 | ELECTRONIC OPTIONALS
CAN RS485套件_ KIT CAN RS485 型号_MODELS
CCRS485转换器, Db9连接头, 遥控软件
采用MODBUS协议的CAN/RS485转换模块，可以把发电机组的一些确定参数和详细资料
提取和写入一个特殊的控制系统。并允许控制和监测。
Converter CCRS485, connector Db9, telecontrol software.
The device CAN/RS485 through MODBUS protocol allows to extract and incorporate
certain values and data from the generating set in a closed control system.
适用于所有配置CE7控制器的机组
Available in all models of gensets with any controller of the CE7 family.
CAN/USB套件_KIT CAN/USB 型号_MODELS
CC/USB转换器, USB线, Db9连接头, 遥控软件, 配置软件
通过CAN/BUS连接我们可以对CE7控制器进行监控和编程
CAN/USB设备允许:
• 控制器通过USB 连接到计算机.
• 控制器配置的综合控制
• 通过软件进行监控
• 零成本通信
CC/USB converter, USB cable, Db9 connector, telecontrol software, configuration
software.
By means of CAN/BUS connection we can control, monitor and program the CE7
controllers.
The CAN/USB device allows:
• The connection via USB of the controller to a PC.
• Integral management of the controller configuration.
• Monitoring and control through Software.
• Comunication with “0” cost.
适用于所有带CE7控制器的机组.
备注：机组和计算机之间距离必须小于1 Km.
Available for all models of generating sets with any CE7 family
controller.
Note: The distance between the PC and the generating set must be less
than 1Km.
CE7控制器扩展模块: 通信模块 | CE7 CONTROLLER EXPANSIONS: COMMUNICATION MODULES
可选项 | OPTIONALS
100