Technical data

Crankcase Breather 6–09

Diaphragm check

1. Remove cover (5).

2. Take off spring (6), seal (4) and diaphragm (3).

3. Check diaphragm (3) for damage.

4. Replace diaphragm if damaged.

5. Mount diaphragm (3) on housing (2).

6. Install new seal (4) and spring (6) together

with cover (5).

7. Tighten screws of cover (5) to 6 Nm + 2 Nm.

8. Check diaphragms in further oil separators in

he same way.