Technical data

6–20 Fuel Injector
Injector removal
1. Remove leak-off-fuel lines.
2. Remove fuel line (3).
3. Remove thrust screw (2).
4. Pull off pressure pipe neck (1).
5. Extract fuel from the exposed bores using the
suction device.
6. Seal all connections with appropriate plugs.
7. Remove screw (2).
8. Take off clamp (1).
9. Screw extractor into injector.
10. Remove injector using the impact extractor.
11. Remove sealing ring using a self-made hook.
M015560/00E 03-05 ©MTU