Technical data

6–24 Fuel System (Low Pressure)
5. Loosen banjo screw (arrow).
6. Operate the pump with the handle until fuel
without bubbles comes out of the nipple.
7. Tighten banjo screw.
8. Loosen union nut of fuel return line.
9. Loosen non-return valve (arrow).
10. Operate the pump with the handle until fuel
without bubbles comes out of the nipple.
11. Tighten non-return valve.
12. Tighten union nut of fuel return line.
13. Lock fuel priming pump, screw in handle.
M015560/00E 03-05 ©MTU