Technical data

Lube Oil System 6–39

6.13 Lube Oil System

6.13.1 Engine oil change

Preconditions

• Engine is stopped and starting disabled.

• Engine is at operating temperature.

• MTU Fluids and Lubricants Specification (A001061/..) is available.

Material

Designation / Use Part No. Qty.

Engine oil

Spare parts

Designation / Use Part No. Qty.

Sealing ring

WARNING

Hot engine oil.

Engine oil can contain combustion residues which are harmful to health.

Risk of injury and scalding!

• Wear protective clothing, gloves, and goggles / safety mask.

• Avoid contact w ith skin.

• Do not inhale oil vapor.

Oil change without semirotary hand pump: Draining oil at drain plug on oil pan

rovide a suitable container in which to collect the oil.

2. Remove drain plug and drain oil.

3. Install drain plug with new sealing ring.

4. Replace engine oil filter ( → Page 6 – 42).

Oil change using semirotary hand pump: Oil extraction

1. Provide a suitable container in which to collect the oil.

2. Extract all oil from oil pan using the hand pump.

3. Replace engi

ne oil f ilter (→ Page 6 – 42).