Technical data

Annex 7–01
7.1 Abbreviations
Abbrevia-
tion
Meaning Explanation
ANSI American National Standards Institute
ATL Abgasturbolader Turbocharger
BR Baureihe Engine Series
CAN Controller Area Network
DIN Deutsches Institut für Normung e. V. German Standardization Organization, at the same
time identifier of German standards (DIN = "Deutsche
Industrie-Norm")
DL Default Lost Alarm: Default CAN bus failure
ECU Engine Control Unit
EDM Engine Data Module
EEPROM Electrically Erasable and Programmable
Read-Only Memory
EMU Engine Monitoring Unit
FLS Fluids and Lubricants Specification MTU Publication No. A01061/..
HI High Alarm: Measured value exceeds 1st maximum limit
HIHI High High Alarm: Measured value exceeds 2nd maximum limit
HT High Temperature
IDM Interface Data Module
ISO International Organization for
Standardization
KGS Kraftgegenseite Engine free end in accordance with DIN ISO 1204
KS Kraftseite Engine driving end in accordance with D IN ISO 1204
LED Light Emitting Diode
LO Low Alarm: Measured value lower than 1st minimum limit
LOLO Low Low Alarm: Measured value lower than 2nd minimum limit
OT Oberer Totpunkt Top dead center (TDC)
P-xyz Pressure-xyz Pressure measuring point xyz
PAN Panel
PIM Peripheral Interface M odule
RL Redundancy Lost Alarm: Redundant CAN bus failure
SAE Society of Automotive Engineers U.S. standardization organization
SD Sensor Defect Alarm: Sensor failure
SS Safety System Alarm initiated by safety system
M015560/00E 03-05 ©MTU