Operating instructions

  52 Battery-Charging Generator

Battery-charging generator drive  drive belt

replacement

1. Remove guard cover.

2. Loosen locknut (2) and screws (1).

3. Release drive belt with tensioning nut (3) and

take off belt.

4. Check belt pulleys for cleanliness, remove

dirt, if any.

5. Fit new drive belt.

6. Tension drive belt with tensioning nut (3) and

check belt tension (

Page 6  50).

7. Tighten locknut (2).

8. Tighten screws (1).

9. Install guard cover.

10. Check drive-belt tension after 30 minutes and

again after 8 hours engine run time.

6.17.4 Battery-charging generator  condition check

Preconditions

 Engine is stopped and starting disabled.

Battery-charging generator  condition check

1. Check securing screws of battery-charging generator for secure seating.

2. Tighten loose screw connections.

3. Check wiring (

Page 6  55).