Operating instructions

Annex 1
7.1 Abbreviations
Abbrevia-
tion
Meaning Explanation
A/D Analog-to-Digital
AL Alarm Alarm (general)
ANSI American National Standards Institute
ATL Abgasturbolader Turbocharger
BR Baureihe Engine Series
CAN Controller Area Network
DIN Deutsches Institut für Normung e. V. German Standardization Organization, at the same
time identifier of German standards (DIN = "Deutsche
Industrie-Norm")
DL Default Lost Alarm: Default CAN bus failure
ECU Engine Control Unit
EDM Engine Data Module
EEPROM Electrically Erasable and Programmable
Read-Only Memory
EMU Engine Monitoring Unit
FLS Fluids and Lubricants Specification MTU Publication No. A01061/..
HI High Alarm: Measured value exceeds 1st maximum limit
HIHI High High Alarm: Measured value exceeds 2nd maximum limit
HT High Temperature
IDM Interface Data Module
IMO International Maritime Organisation
ISO International Organization for
Standardization
KGS Kraftgegenseite Engine free end in accordance with DIN ISO 1204
KS Kraftseite Engine driving end in accordance with DIN ISO 1204
LED Light Emitting Diode
LO Low Alarm: Measured value lower than 1st minimum limit
LOLO Low Low Alarm: Measured value lower than 2nd minimum limit
OT Oberer Totpunkt Top dead center (TDC)
P-xyz Pressure-xyz Pressure measuring point xyz
PAN Panel
PC Personal Computer
PIM Peripheral Interface Module
M015403/00E 02-09 © MTU
www.generent.ru