Operating instructions

  18 Fuel Injector

Injector installation

1. Prior to installation, remove all plugs.

2. Coat new O-rings (scope of supply of injector)

with petroleum jelly and fit on injector.

3. Fit new sealing ring with petroleum jelly on

injector, observe installation position of sealing

ring.

4. Clean sealing surface on cylinder head and

protective sleeve.

5. Insert injector (1) into cylinder head, ensuring that

the HP fuel line connection is aligned correctly.

6. Fit injector installation jig (2).

7. Lock force-in lever (1) between pushrods.

8. Release palm grip (3) and move pressure

element (2) to correct position of installation jig.

9. Secure palm grip (3) and press injector (4) with

force-in lever into cylinder head.

10. Remove force-in tool.