Operating instructions

  28 Fuel Filter

2. Open vent plug (5) of the contaminated filter.

3. Unlock drain cock (6) by pressing toggle and

open it.

4. Drain water and contaminants from the filter.

5. Close drain cock (6).

6. Remove screws securing the cover and take

off cover (2).

7. Remove spring (4) and filter element (3).

8. Insert new filter element (3) and spring (4).

9. Fill filter housing with clean fuel.

10. Place new gasket in cover (2).

11. Fit cover with gasket and secure it with screws.

12. Cut the cut-out filter in again.

13. Close vent plug (5) when fuel emerges.

14. Align adjustable pointer of differential pressure

gauge with pressure-indicating pointer.

(

Page 6  23).