Operating instructions

  38 Oil Filtration / Cooling

12. Move standpipe (12) over rotor lower section (13).

13. Insert new filter sleeve (9) with stiffener plate (10)

into rotor cap (8) and fit on standpipe (12).

14. Install knurled nut (7) and tighten.

15. Place rotor (5) in housing (6) and check for

ease of movement.

16. Fit new sealing ring (4) on housing (6).

17. Fit cover (2).

18. Tighten Tommy nut (1) by hand.

19. Install clamp (3) and tighten.

20. Tighten Tommy nut (1).