Operating instructions

6.16.5 Coalescer filter element – Replacement
Preconditions
☑ System is switched off and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Torque wrench, 6-50 Nm
F30027336 1
Ratchet adapter
F30027339 1
Diesel fuel
Engine oil
Coalescer filter element
(→ Spare Parts Catalog)
Gasket
(→ Spare Parts Catalog)
WARNING
Fuels are combustible.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
CAUTION
Contamination of components.
Damage to component!
• Observe manufacturer's instructions.
• Check components for special cleanness.
CAUTION
Incorrect installation of components and lines.
Damage to component!
• Ensure that components/lines are installed so that they are never under tension or strain.
• Ensure correct installation position of components.
Coalescer filter element –
Replacement
1. Close ball valve at the inlet and outlet of the
fuel treatment system.
2. Open drain valve.
3. Drain fuel.
4. Close drain valve.
5. Remove nut (9) with washer (2).
6. Remove screws (1).
7. Remove cover with gasket (10).
8. Remove nut (3), washer (8) and end
plate (7).
9. Remove coalescer filter element (4).
10. Catch fuel as it runs out.
11. Clean housing with a non-linting cloth, rinse
with fuel if required.
12. Check housing for corrosion.
13. Clean housing sealing surfaces.
14. Install coalescer filter element.
15. Install end plate (7), washer (8) and nut (3).
MS150095/01E 2012-08 | Task Description | 103
TIM-ID: 0000007735 - 007