Operating instructions

Engine side
– Designation 16
Engine wiring
– Check 106
Environmental protection 11
Exhaust gas recirculation
– Flaps
– Operation check 68
F
Filter
– Air
– Replacement 65
– Coalescer Element
– Replacement 103
– Coolant
– Replacement 86
– Engine oil
– Replacement 71
– Fuel
– Replacement 58
Fire prevention 11
Firing order 18
Flaps
– Exhaust gas recirculation
– Flaps 67
– Operation check 68
– Overview 67
Fluids and lubricants 11
Fuel
– Draining 57
– Filter
– Replacement 58
– Injector
– Removal and Installation 49
– Prefilter
– Differential pressure gauge - Check and adjust‐
ment 59
– Draining 60
– Filter element replacement 63
– prefilter
– Flushing 61
– Treatment system
– Troubleshooting 37
– treatment system
– Shutdown 34
– Switching on 29
Fuel filter
– Replacement 58
Fuel prefilter
– Differential pressure gauge
– Check and adjustment 59
– Draining 60
– Filter element
– Replacement 63
– Flushing 61
Fuel system
– Venting 56
Fuel treatment system
– Putting into operation 26
– Shutdown 34
– Switching on 29
G
General conditions 5
H
Hotline 120
HP fuel line and pressure pipe neck – Replacement 54
Humidity sensor
– Replacement 112
I
Injector
– Removal and Installation 49
– Replacement 48
Intercooler
– Vent and drain points 87
L
Lambda sensor
– Replacement 108
List of abbreviations 117
M
Maintenance
– Maintenance Schedule
– Maintenance task reference table [QL1] 36
Maintenance work
– Safety regulations 8
MTU contact persons 120
N
NOx sensor
– Replacement 110
O
Operational checks 30
Overview
– Exhaust gas recirculation
– Flaps 67
– Operation check 68
– Overview 67
– Lambda, NOx and humidity sensor 107
P
Personnel and organizational requirements 6
Plant
– Cleaning 35
Pressure gauge
– Differential pressure
– Check 100
Pump
– Charge-air coolant
– Relief bore check 93
– Engine coolant
– Relief bore check 84
132 | Appendix B | MS150095/01E 2012-08
DCL-ID: 0000009637 - 003