Operating instructions

6.4.2 Injector – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Installation device
F6790085 1
Puller
F6790636 1
Fuel suction device
F30378207 1
Torque wrench, 0.5-5 Nm
0015384230 1
Torque wrench, 20-100 Nm
F30026582 1
Ratchet
F30027340 1
Adapter
F30006234 1
Open-end socket wrench, 19 mm
F30453236 1
Crowfoot wrench, 19 mm
F30027424 1
Crowfoot wrench, 22 mm
F30027425 1
Double-head box wrench
F30011450 1
Open-end socket wrench, 24 mm
F30453238 1
Grease (Kluthe Hakuform 30-10/Emulgier)
X00029933 1
Engine oil
Sealing ring
(→ Spare Parts Catalog)
WARNING
Fuels are combustible.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
WARNING
Compressed air
Risk of injury!
• Do not direct compressed-air jet at persons.
• Wear protective goggles / safety mask and ear protectors.
Preparatory steps
1. Shut off fuel supply line.
2. Drain fuel (→ Page 57).
3. Remove cylinder head cover (→ Page 47).
MS150095/01E 2012-08 | Task Description | 49
TIM-ID: 0000023980 - 002