Operating instructions

7.7.2 Injector – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Installation and removal tool for injector
F6790161 1
Milling cutter
F30452739 1
Slotted nut screwdriver
F30452578 1
Torque wrench, 0.5-5 Nm
0015384230 1
Torque wrench, 10-60 Nm
F30510423 1
Torque wrench, 60-320 Nm
F30047446 1
Assembly paste (Optimoly Paste White T)
40477 1
Grease (Kluthe Hakuform 30-10/Emulgier)
X00029933 1
Engine oil
WARNING
Fuels are combustible.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
CAUTION
Removal of all injectors.
Damage to component!
• Ensure that the high-pressure fuel accumulator is secured on the engine through two HP lines.
CAUTION
Cable damage during operation.
Fire hazard!
• Twist cables when installing.
• Ensure that cables do not touch components.
Preparatory steps
1. Shut off fuel supply to engine.
2. Remove cylinder head cover (→ Page 76).
M015675/05E 2011-10 | Task Description | 79
TIM-ID: 0000000952 - 003