Operating instructions

Abbre-
viation
Meaning Explanation
EDM Engine Data Module Memory module for engine data
EE-
PROM
Electrically Erasable Programmable Read
Only Memory
Electrically Erasable Programmable Read Only Mem-
ory
EFPA Electronic Foot Pedal Assembly Electronic Foot Pedal Assembly
EGR Exhaust Gas Recirculation Exhaust gas recirculation
EIL Engine Ident Label
EMU Engine Monitoring Unit Engine monitoring unit
ESCM Extreme Site Condition Management Power reduction in the case of extreme site condi-
tions
ETK Ersatzteilkatalog Spare Parts Catalog
EUI Electronic Unit Injector Electronic Unit Injector
FO Frequency Output
FPS Fuel Pressure Sensor Monitors fuel pressure
FRS Fuel Restriction Sensor
FTS Fuel Temperature Sensor Monitors fuel temperature
FWCP Fire Water Control Panel Governor cabinet
GND Ground
HD
(HP)
High pressure
HI High Alarm: Measured value exceeds 1st maximum limit
value
HIHI High High Alarm: Measured value exceeds 2nd maximum limit
value
HT High Temperature High temperature
IDM Interface Data Module Memory module for interface data
INJ Injector
ISO International Organization for Standardiza-
tion
International umbrella organization for all national
standardization institutes
KGS Kraftgegenseite Engine free end in accordance with DIN ISO 1204
KS Kraftseite Engine driving end in accordance with DIN ISO 1204
L1 Limit 1 Limit value 1
L2 Limit 2 Limit value 2
LED Light Emitting Diode Light emitting diode
LLK Ladeluftkühlung Intercooler
LO Low Alarm: Measured value lower than 1st minimum limit
value
LOLO Low Low Alarm: Measured value lower than 2nd minimum lim-
it value
LSG Maximum-speed governor
LSU Lambda Sonde Universal Universal lambda probe
LT Low Temperature Low temperature
MCR Maximum Continuous Rating Torque limiting curve
N/A Not Applicable
ND Niederdruck Low pressure
132 | Appendix A | M015675/06E 2013-04
TIM-ID: 0000000858 - 011