Operating instructions

Remove injector
Note: Always replace the first and last injectors
of one engine side first. Replace the inner
injectors only after the installation of the
outer injectors on this engine side is com-
pleted.
1. Release the cable terminal threaded con-
nection (arrows) on the injector and re-
move cable terminals.
2. Remove screw (2) and take off hold-down
clamp (1).
3. Remove high-pressure fuel line (5).
4. Install installation/removal device on the
cylinder head.
5. Remove injector with installation/removal
device.
6. Remove the installation/removal device.
M015675/06E 2013-04 | Task Description | 79
TIM-ID: 0000000952 - 010