Operating instructions

353 – AL Open Load Cylinder B3
ZKP-Number: 18.004.552
Cause Corrective action
Disruption fault in injector cabling
to cylinder B3. Result: Misfiring.
1. Check continuity of injector cabling or exclude open load in
solenoid valve circuit (e.g. by injector replacement)
2. Error clearance: After each working cycle.
354 – AL Open Load Cylinder B4
ZKP-Number: 18.004.553
Cause Corrective action
Disruption fault in injector cabling
to cylinder B4. Result: Misfiring.
1. Check continuity of injector cabling or exclude open load in
solenoid valve circuit (e.g. by injector replacement)
2. Error clearance: After each working cycle.
355 – AL Open Load Cylinder B5
ZKP-Number: 18.004.554
Cause Corrective action
Disruption fault in injector cabling
to cylinder B5. Result: Misfiring.
1. Check continuity of injector cabling or exclude open load in
solenoid valve circuit (e.g. by injector replacement)
2. Error clearance: After each working cycle.
356 – AL Open Load Cylinder B6
ZKP-Number: 18.004.555
Cause Corrective action
Disruption fault in injector cabling
to cylinder B6. Result: Misfiring.
1. Check continuity of injector cabling or exclude open load in
solenoid valve circuit (e.g. by injector replacement)
2. Error clearance: After each working cycle.
357 – AL Open Load Cylinder B7
ZKP-Number: 18.004.556
Cause Corrective action
Disruption fault in injector cabling
to cylinder B7. Result: Misfiring.
1. Check continuity of injector cabling or exclude open load in
solenoid valve circuit (e.g. by injector replacement)
2. Error clearance: After each working cycle.
358 – AL Open Load Cylinder B8
ZKP-Number: 18.004.557
Cause Corrective action
Disruption fault in injector cabling
to cylinder B8. Result: Misfiring.
1. Check continuity of injector cabling or exclude open load in
solenoid valve circuit (e.g. by injector replacement)
2. Error clearance: After each working cycle.
102 | Troubleshooting | MS150047/02E 2012-03
TIM-ID: 0000018389 - 002