Operating instructions

Cleaning strainer
1. Shake coarse deposits out of strainer.
2. Clean all metallic parts with cleaning agent (Snow-White 11-0), then rinse with cleaning agent (Hakupur
312).
3. Use a soft brush to remove stubborn deposits from strainer if required. Ensure that the mesh is not dam‐
aged.
4. Carefully blow out strainer with compressed air from outside to inside.
Checking strainer
1. Check strainer for damage.
2. Fit new strainer if damaged or severely contaminated.
Installing strainer
1. Insert strainer with new O-ring into housing.
2. Fill housing with new engine oil.
3. Install cover (1) with new O-ring.
MS150047/02E 2012-03 | Task Description | 145
TIM-ID: 0000014187 - 002