Operating instructions

6. Tighten drain plugs (2) and (3) with torque wrench to the specified torque.
Name Size Type Lubricant Value/Standard
Screw M26 x 1.5 Tightening torque (Engine oil) 100 Nm +10 Nm
Filling with new engine oil
1. Open cap on filler neck.
2. Pour in engine oil at filler neck up to “max.”
mark on oil dipstick.
3. Close cap on filler neck.
4. Check engine oil level (→ Page 155).
5. After oil change and oil filter replacement,
bar engine with starting system
(→ Page 113).
M015412/03E 2012-02 | Task Description | 157
TIM-ID: 0000034455 - 001