Operating instructions

Item Color Inscription Meaning / Function
8 White DIM ↓ Holding down the button decreases LCD back‐
ground illumination.
9 White LAMP TEST Pressing the button initiates lamp test.
10 Red TEST OVERSPEED Pressing the button initiates overspeed test.
LED (spot) lights up as long as the overspeed
test is running.
11 Green (depending on type of
gearbox and propulsion)
FPP: Pressing the button engages gear ahead.
CPP, WJ, VS: Pressing the button engages
clutch.
LED (spot) lights up when GCU feedback is ac‐
tive.
12 Green FPP, CPP, WJ, VS: Pressing the button disen‐
gages clutch.
LED (spot) lights up when GCU feedback is ac‐
tive.
13 Green FPP: Pressing the button engages gear astern.
CPP, VS: No function assigned.
WJ: Holding down the button provides flushing of
water jet intake channel (water-jet reverse) .
LED (spot) lights up when GCU feedback is ac‐
tive.
14 White ENGINE SPEED IN‐
CREASE
Engine speed is increased as long as the button
is held down.
15 White ENGINE SPEED DE‐
CREASE
Engine speed is decreased as long as the button
is held down.
16 Green READY FOR OPERA‐
TION
Pressing the button switches between "Not ready
for operation" and "Ready for operation".
LED (spot) is illuminated when the button is in the
"Ready for operation" position.
17 Green LOCAL CONTROL Pressing the button switches between local oper‐
ation and remote control.
LED (spot) lights up when local mode is active.
18 White START Pressing the button initiates the automatic engine
start sequence.
LED (spot) lights up as long as the starting proce‐
dure is running.
19 White STOP Pressing the button initiates automatic engine
stopping procedure.
LED (spot) lights up as long as the STOP signal
is available (also if transmitted from RCS).
20 Red EMERGENCY STOP Pressing the button initiates an immediate emer‐
gency engine stop.
LED (spot) flashes once the emergency stop has
been tripped and until the alarm has been ac‐
knowledged.
86 | Operation | M015412/03E 2012-02
TIM-ID: 0000008861 - 002