Specifications

Revision overview from version A001061/33 to A001061/32 101
9 Revision overview from version A001061/33 to
A001061/32
General section
All information on the Series 1800 has been taken from MTU Fluids and Lubricants Specifications
A001061/32. The Series 1800 has its own MTU Fluids and Lubricants Specifications, which
are available under publication number A001062/..
Ser. no.
Page
Subject
Action Measure
1
Requirements of the
engine oils for MTU
approval
added
Oil category 2.1
2
Mixing of engine oils
added whole paragraph
3
Special Features
added
Single-grade and
multigrade oils are
available through
MTU Asia
4
Performance
specifications for
engine oils for Series
2000 and 4000
added
Oil category 2.1
5
Oil change intervals
added
Oil category 2.1
6 Analytical limit
values for diesel
engine oils
added in Soot (limit
value) line:
Oil category 2.1
7
Analytical limit
values for gas engine
oils
omitted in Wear
elements (silicon)
line:
Index
1)
8 Requirements added
Conditioning of the
coolant takes place
outside the engine.
9
Information (after
Table 8)
Position changed
moved forward
to paragraph
on Emulsifiable
corrosion inhibiting
oils
10
Selection of a
Suitable Diesel Fuel
Change
2nd paragraph new
11 Emission
certification
added whole paragraph
12 Warning added
Dispose of used
fluids and lubricants
...
13
Fuels of comparable
quality with following
test results (Table
11)
added in line Total
contamination
D 6217 in column
Test methods
A001061/33E 08-01 ©MTU
TIM ID: 0000029758 – 001