Specifications

Preservation Specifications 93
Form Sheets
Preservation Check Sheet
Engine model: .............................. Engine No. .............................. Acceptance date: ..............................
Correct completion of the preservation t asks as specified in the preservation instructions must be certified on this
check sheet by the person completing the various tasks.
Tasks completed Date Name
Lubrication system
Preserved with preservation oil.
Brand of oil used:
....................................................................................................
Fuel system
Preserved with preservation fuel.
Preservation fuel used:
....................................................................................................
Fuel main and prefilters, fuel pipework not drained.
Cooling system
Is preserved with specified coolant.
Coolant is not drained (except with special packing, engines which have
been de-installed and engines for dispatch).
Non-painted parts
These are brush-coated with corrosion inhibitor. All engine openings are
sealed as specified. All parts to be kept free of paint such as flywheel,
starter ring gear and starter pinion as well as non-painted sections of the
control linkage and the uncovered coupling flange (as appropriate) for the
3-phase generator are brush-coated with corrosion-inhibiting oil.
Corrosion inhibitor used:
....................................................................................................
Engine is preserved as specified.
Represervation completed as specified
On completion of preservation, place the completed check sheet in a plastic envelope. Seal the envelope and tie it
to the engine at a clearly visible location. Keep this check sheet with the engine until completion of depreservation.
A001061/33E 08-01 ©MTU
TIM ID: 0000010139 – 006