User manual

ScreenShot
FOVToggle This command toggles the out-the-window (OTW) view
field toggles between 60 degrees (normal) and 20 degrees
(narrow).
FOVDecrease This command increases the OTW view field by an
increment that may be specified in the .cfg file.
FOVIncrease This command decreases the OTW view field by an
increment that may be specified in the .cfg file.
FOVDefault This command returns the OTW view field to the default
value (60 degrees).
OTWToggleAlpha
SimAVTRToggle
SimSelectiveJettison
SimEmergencyJettison
SimWheelBrakes
SimECMOn
SimECMStandby Refers to the right throw of the HOTAS CMS switch. This
command places the ECM transmitter in standby mode so
that it makes no emissions. This command only operates if
Realistic Avionics are selected.
SimECMConsent Refers to the down throw of the HOTAS CMS switch (i.e.
towards the pilot). This command enables the ECM
transmitter to begin transmitting. This command only
operates if Realistic Avionics are selected.
SimRadarElevationCenter
SimHsiCourseInc
SimHsiCourseDec
SimHsiHeadingInc
SimHsiHeadingDec
SimAVTRToggle
SimMPOToggle Note: in reality, the physical switch for this control is a
momentary spring-loaded action. This means it should be
held in the OVRD position to be effective. The
104