User manual

F4-BMS 2.0 Technical Manual
SimMPOToggle command does not work this way and
should be considered deprecated for cockpit hardware
builder use. See SimMPO instead.
SimMPO Refers to the manual pitch override switch on the manual
pitch panel. This command is a momentary that must be
held to keep the switch in the OVRD position. When the
key for this command is held, normal FLCS limter values
are suspended. Once the key is released, the switch snaps
back to the NORM position and normal FLCS limiters once
more apply. This command only operates if Realistic
Avionics are selected.
SimSilenceHorn
SimStepHSIMode
SimHSIIlsTcn This command refers to the HSI modes knob on the INSTR
panel. It places the knob in the ILS/TCN position directly.
This command only operates if Realistic Avionics are
selected.
SimHSITcn This command refers to the HSI modes knob on the INSTR
panel. It places the knob in the TCN position directly. This
command only operates if Realistic Avionics are selected.
SimHSINav This command refers to the HSI modes knob on the INSTR
panel. It places the knob in the NAV position directly. This
command only operates if Realistic Avionics are selected.
SimHSIIlsNav This command refers to the HSI modes knob on the INSTR
panel. It places the knob in the ILS/NAV position directly.
This command only operates if Realistic Avionics are
selected.
SimCBEOSB_1L
SimCBEOSB_2L
SimCBEOSB_3L
SimCBEOSB_4L
SimCBEOSB_5L
SimCBEOSB_6L
SimCBEOSB_7L
105