User manual

avionics selected.
SimScalesVAH Refers to the vertical velocity control switch on the HUD
panel. This command places that switch in the VAH
position (middle). The command only operates with realistic
avionics selected.
SimScalesOff Refers to the vertical velocity control switch on the HUD
panel. This command places that switch in the OFF
position (down). The command only operates with realistic
avionics selected.
SimHUDFPM
SimHUDDED
SimHUDDEDOff Refers to the DED data control on the HUD panel. This
command places the switch in the OFF (down) position.
The HUD will display no DED or PFL data. The command
only operates with realistic avionics selected.
SimHUDDEDPFL Refers to the DED data control on the HUD panel. This
command places the switch in the PFL (middle) position.
The HUD display will include PFL data. The command only
operates with realistic avionics selected.
SimHUDDEDDED Refers to the DED data control on the HUD panel. This
command places the switch in the DED (up) position. The
HUD will display DED data. The command only operates
with realistic avionics selected.
SimHUDVelocity
SimHUDVelocityCAS Refers to the velocity display control on the HUD panel.
This command places the control in the CAS (up) position.
The speed shown in the HUD display will be calibrated
airspeed. The command only operates with realistic
avionics selected.
SimHUDVelocityTAS Refers to the velocity display control on the HUD panel.
This command places the control in the TAS (middle)
position. The speed shown in the HUD display will be true
airspeed. The command only operates with realistic
avionics selected.
SimHUDVelocityGND Refers to the velocity display control on the HUD panel.
This command places the control in the GND SPD (down)
position. The speed shown in the HUD display will be
108