User manual

calculate the brightness. The command only operates with
realistic avionics selected.
SimHUDBrightnessUp
SimHUDBrightnessDown
SimCycleRadioChannel This command has maps to the UHF preset channel
selector knob on the UHF panel. This command has bee
updated to match correct behavior. In this version of the
game, this command will change only the UHF channel
and then if and only if the CNI switch on the AUX COMM
panel is in the backup position. There is no backup control
for changing VHF radio channel so if the ICP is not working
you are out of luck on that one.
SimDecRadioChannel Can be used to map to the radio preset channel selector
encoder knob on the UHF. This command does the
inverse of the SimCycleRadioChannel command which is
to say it changes the channel but cycling through the 8
choices in reverse order. This command will change only
the UHF channel and then if and only if the CNI switch on
the AUX COMM panel is in the backup position. There is
no backup control for changing VHF radio channel so if the
ICP is not working you are out of luck on that one. This
command only operates with realistic avionics selected.
SimToggleRadioVolume
RadioTankerCommand
RadioTowerCommand
RadioAWACSCommand
RadioWingCommand
RadioElementCommand
RadioFlightCommand
WingmanClearSix
ElementClearSix
FlightClearSix
WingmanCheckSix
ElementCheckSix
110