User manual

F4-BMS 2.0 Technical Manual
position. Technically, this control doesn’t exist in the jet
(see instead the SimTrimYawRight which should be
mapped to the manual trim panel).
AFAileronTrimLeft Added in eRazor executables. This command is for
mapping to the HOTAS trim hat left throw position. NB: this
command does nothing when the Trim AP Disc switch is in
the DISC position.
AFAileronTrimRight Added in eRazor executables. This command is for
mapping to the HOTAS trim hat right throw position. NB:
this command does nothing when the Trim AP Disc switch
is in the DISC position.
AFElevatorTrimUp Added in eRazor executables. This command is for
mapping to the HOTAS trim hat down throw position. NB:
this command does nothing when the Trim AP Disc switch
is in the DISC position.
AFElevatorTrimDown Added in eRazor executables. This command is for
mapping to the HOTAS trim hat up throw position. NB: this
command does nothing when the Trim AP Disc switch is in
the DISC position.
AFResetTrim Added in eRazor executables. NB: there appears to be no
real control for this in the actual jet; trim AP Disc zeros out
any input commanded from the HOTAS trim hat and the
FLCS resets trim when jet speed drops below 60 knots but
the game doesn’t currently implement that.
AFAlternateGear Added in eRazor executables.
AFAlternateGearReset Added in eRazor executables.
SimFLIRToggle Added in eRazor executables.
SimToggleTFR Added in eRazor executables.
SimMainPowerInc Added in eRazor executables.
SimMainPowerDec Added in eRazor executables.
SimMainPowerOff Refers to the electrical power switch in the ELEC panel.
This command places the switch in the OFF (down)
position. Power is removed from all electrical buses. This
command only operates if realistic avionics are selected.
SimMainPowerBatt Refers to the electrical power switch in the ELEC panel.
This command places the switch in the BATT (middle)
119