User manual

position. Power is applied from the battery to the electrical
system. Generators will not run with the switch in this
position. This command only operates if realistic avionics
are selected.
SimMainPowerMain Refers to the electrical power switch in the ELEC panel.
This command places the switch in the OFF (down)
position. Power is applied to all electrical buses and the
generators are enabled. This command only operates if
realistic avionics are selected.
AFFullFlap SP2 command.
AFNoFlap SP2 command.
AFIncFlap SP2 command.
AFDecFlap SP2 command.
AFFullLEF SP2 command.
AFNoLEF SP2 command.
AFIncLEF SP2 command.
AFDecLEF SP2 command.
AFDragChute SP2 command.
AFCanopyToggle SP2 command.
SimICPIFF SP3 command.
SimICPLIST SP3 command.
SimICPTHREE SP3 command.
SimICPSIX SP3 command.
SimICPEIGHT SP3 command.
SimICPNINE SP3 command.
SimICPZERO SP3 command.
SimICPResetDED SP3 command.
SimICPDEDUP SP3 command.
SimICPDEDDOWN SP3 command.
SimICPDEDSEQ SP3 command.
120