User manual

F4-BMS 2.0 Technical Manual
SimEWSJammerPower SP3 command.
SimEWSJammerOn Refers to the JAMMER switch on the CMDS panel. This
command places the switch in the ON position and allows
the CMDS system to power on the ECM system if the CMS
mode is in SEMI or AUTO modes (see also SimEWS
ModeSemi and SimEWSModeAuto). Note this command is
not a power on for the ECM transmitter so you can enable
ECM manually with the HOTAS controls even if this switch
is OFF. This command is only operable if realistic avionics
are selected.
SimEWSJammerOff Refers to the JAMMER switch on the CMDS panel. This
command places the switch in the OFF position and
prevents the CMDS system from powering on the ECM
system if the CMS mode is in SEMI or AUTO modes (see
also SimEWS ModeSemi and SimEWSModeAuto). Note
this command is not a power off for the ECM transmitter so
you can enable ECM manually with the HOTAS controls
even if this switch is OFF. This command is only operable if
realistic avionics are selected.
SimEWSChaffPower SP3 command.
SimEWSChaffOn Refers to the CH switch on the CMDS panel. This
command places the switch in the ON position and enables
the use of chaff as part of the countermeasures dispense
program. This command is only operable if realistic
avionics are selected.
SimEWSChaffOff Refers to the CH switch on the CMDS panel. This
command places the switch in the OFF position and
disables the use of chaff as part of the countermeasures
dispense program. This command is only operable if
realistic avionics are selected.
SimEWSFlarePower SP3 command.
SimEWSFlareOn Refers to the FL switch on the CMDS panel. This
command places the switch in the ON position and enables
the use of flares as part of the countermeasures dispense
program. This command is only operable if realistic
avionics are selected.
SimEWSFlareOff Refers to the FL switch on the CMDS panel. This
command places the switch in the OFF position and
disables the use of flares as part of the countermeasures
125