User manual

F4-BMS 2.0 Technical Manual
SimEWSProgInc SP3 command.
SimEWSProgDec SP3 command.
SimEWSProgOne Refers to the countermeasures program selection knob on
the CMDS panel. The command places the knob in the “1”
position. Program one is active. This command only
operates if realistic avionics are selected.
SimEWSProgTwo Refers to the countermeasures program selection knob on
the CMDS panel. The command places the knob in the “2”
position. Program two is active. This command only
operates if realistic avionics are selected.
SimEWSProgThree Refers to the countermeasures program selection knob on
the CMDS panel. The command places the knob in the “3”
position. Program three is active. This command only
operates if realistic avionics are selected.
SimEWSProgFour Refers to the countermeasures program selection knob on
the CMDS panel. The command places the knob in the “4”
position. Program four is active. This command only
operates if realistic avionics are selected.
SimInhibitVMS SP3 command.
SimVMSOn Refers to the VOICE MESSAGE SWITCH on the
ZEROISE PANEL (right console). This command places
the switch in the up or ON position enabling the VMS to
play audio cue messages (aka “Bitchin’ Betty“). This
command only operates if realistic avionics are selected.
SimVMSOFF Refers to the VOICE MESSAGE SWITCH on the
ZEROISE PANEL (right console). This command places
the switch in the down or INHIBIT position preventing the
VMS from playing audio cue messages (aka “Bitchin’
Betty“). This command only operates if realistic avionics
are selected.
SimRFSwitch SP3 command.
SimRFNorm Refers to the RF switch on the MISC panel. This command
places the switch in the NORM (up) position. RF
transmissions from systems that are emitters and that are
active are enabled. This command only operates if realistic
avionics are selected.
SimRFQuiet Refers to the RF switch on the MISC panel. This command
127