User manual

F4-BMS 2.0 Technical Manual
SimExtlAntiColl SP2 command.
SimAntiCollOn Refers to the ANTI-COLLISION switch on the EXT
LIGHTING panel. This command places the switch in the
up (i.e. on) position and turns on the anti-collision beacon
light (provded the master is in the NORM position). This
command only operates if realistic avionics are selected.
SimAntiCollOn Refers to the ANTI-COLLISION switch on the EXT
LIGHTING panel. This command places the switch in the
off position and turns off the anti-collision beacon light. This
command only operates if realistic avionics are selected.
SimExtlSteady SP2 command.
SimLightsSteady Refers to the position light mode switch on the EXT
LIGHTING panel. This command places the switch in the
STEADY position and causes the external wing and tail
position lights to be on constantly (provided the master is in
the NORM position and the Wing/Fuselage switch is in the
BRT position – see below). This command only operates if
realistic avionics are selected.
SimLightsFlash Refers to the position light mode switch on the EXT
LIGHTING panel. This command places the switch in the
FLASH position and causes the external wing and tail
position lights to flash alternating between on and off
(provided the master is in the NORM position and the
Wing/Fuselage switch is in the BRT position – see below).
This command only operates if realistic avionics are
selected.
SimExtlWing SP2 command.
SimWingLightBrt Refers to the positon light brightness switches on the EXT
LIGHTING panel. Note there is only one switch throw
implemented in the game for what should be two physical
switches (wing and fuselage) This command places the
switches in the BRT position which turns on the position
lights in bright mode. This command only operates if
realistic avionics are selected.
SimWingLightOff Refers to the positon light brightness switches on the EXT
LIGHTING panel. Note there is only one switch throw
implemented in the game for what should be two physical
switches (wing and fuselage) This command places the
switches in the OFF position which turns off the position
129