User manual

lights. This command only operates if realistic avionics are
selected.
SimDMSUp SP2 command.
SimDMSLeft SP2 command.
SimDMSDown SP2 command.
SimDMSRight SP2 command.
SimAVTRSwitch SP2 command.
SimAVTRSwitchOff Refers to the flight recorder mode switch on the AVTR
panel. This command places the switch in the OFF (down)
position. The AVTR recorder will not run. This command
only operates if realistic avionics are selected.
SimAVTRSwitchAuto Refers to the flight recorder mode switch on the AVTR
panel. This command places the switch in the AUTO
(middle) position. The AVTR recorder will automatically
when the first detent of the HOTAS stick trigger or HOTAS
pickle switch are operated. Recording continues for 30
seconds unless manually terminated or the trigger/pickle
are operated again (which resets the 30 second
countdown). This command only operates if realistic
avionics are selected.
SimAVTRSwitchOn Refers to the flight recorder mode switch on the AVTR
panel. This command places the switch in the ON (down)
position. The AVTR recorder is turned on and will run until
the switch is turned to OFF or until 30 seconds after the
switch is turned to AUTO, providing no trigger or pickle
events reset the 30 second countdown. This command
only operates if realistic avionics are selected.
SimAutoAVTR SP3 command.
SimIFFPower Not implemented.
SimIFFIn Not implemented.
SimINSInc SP2 Command.
SimINSDec SP2 command.
SimINSOff Refers to the INS mode knob on the AVIONIC POWER
panel. This command places the knob in the OFF position.
The INS function is terminated. This command only
130