User manual

F4-BMS 2.0 Technical Manual
SimUFCPower SP3 command.
SimUFCOn Refers to the UFC power switch in the AVIONICS POWER
panel. This command places the switch in the up or ON
position and enables power to the up front controls
(including ICP). This command only operates if realistic
avionics are selected.
SimUFCOff Refers to the UFC power switch in the AVIONICS POWER
panel. This command places the switch in the down or
OFF position and disables power to the up front controls
(including ICP). This command only operates if realistic
avionics are selected.
SimGPSPower SP3 command.
SimGPSOn Refers to the GPS power switch in the AVIONICS POWER
panel. This command places the switch in the up or ON
position and enables power to the GPS recevier. This
command only operates if realistic avionics are selected.
SimGPSOff Refers to the GPS power switch in the AVIONICS POWER
panel. This command places the switch in the down or
OFF position and disables power to the GPS recevier. This
command only operates if realistic avionics are selected.
SimDLPower SP3 command.
SimDLOn Refers to the DL power switch in the AVIONICS POWER
panel. This command places the switch in the up or ON
position and enables power to the data link recevier. This
command only operates if realistic avionics are selected.
SimDLOff Refers to the DL power switch in the AVIONICS POWER
panel. This command places the switch in the down or
OFF position and disables power to the data link recevier.
This command only operates if realistic avionics are
selected.
SimMAPPower SP3 command.
SimMAPOn Refers to the MAP power switch in the AVIONICS POWER
panel. This command places the switch in the up or ON
position. The MAP function is inoperative in the block 50/52
F-16 jets. This command only operates if realistic avionics
are selected.
SimMAPOff Refers to the MAP power switch in the AVIONICS POWER
137