User manual

F4-BMS 2.0 Technical Manual
command places the switch in the down or OFF position
and disables power for the fire control radar which prevents
it from operating. This command only operates if realistic
avionics are selected.
SimHUDPower SP3 command.
SimHUDOn Refers to the on/off switch that is part of the thumb wheel
control for HUD brightness on the ICP. If you roll the thumb
wheel downwards, there is an on/off switch at the end of
travel in that direction. Clicking past this switch in the
upwards direction turns on the HUD power enabling the
unit to display HUD symbology. Remainder of the
thumbwheel’s travel controls symbology brightness. This
command only operates if realistic avionics are selected.
SimHUDOff Refers to the on/off switch that is part of the thumb wheel
control for HUD brightness on the ICP. If you roll the thumb
wheel downwards, there is an on/off switch at the end of
travel in that direction. Clicking past this switch in the
downwards direction turns off the HUD power preventing
the unit from displaying HUD symbology. This command
only operates if realistic avionics are selected.
SimToggleRealisticAvionics SP3 command.
SimIncFuelSwitch SP3 command.
SimDecFuelSwitch SP3 command.
SimFuelSwitchTest Refers to the fuel totalizer control knob on the FUEL QTY
SEL panel. This command places the knob in the TEST
position. In this position the totalizer digits will read “6000”
and the two pointers will both read “2000” on the analog
card. This command only operates if realistic avionics are
selected.
SimFuelSwitchNorm Refers to the fuel totalizer control knob on the FUEL QTY
SEL panel. This command places the knob in the NORM
position. In this position the totalizer digits will display the
total internal fuel available. The two pointers will show the
values for the F/R and A/L fuel systems on the analog card.
This command only operates if realistic avionics are
selected.
SimFuelSwitchResv Refers to the fuel totalizer control knob on the FUEL QTY
SEL panel. This command places the knob in the RESV
position. In this position the totalizer digits will display the
139