User manual

which prevents fuel transferring from these tanks. This
command only operates if realistic avionics are selected.
SimAirSourceNorm Refers to the air source selection control knob on the AIR
COND panel. This command places the knob in the NORM
position. The environmental control system functions
normally including maintaining cockpit pressurization at
8,000 feet MSL and pressurizing external fuel tanks to
ensure proper fuel transfer. This command only operates if
realistic avionics are selected.
SimAirSourceDump Refers to the air source selection control knob on the AIR
COND panel. This command places the knob in the DUMP
position. Cabin pressurization is terminated and the cabin
is vented to outside air pressure. This means cockpit
pressure altitude will increase above 8,000 feet MSL. The
CABIN PRESS caution will illuminate if cockpit pressure
altitude exceeds 27,000 feet (NB: in previous versions of
Falcon4, the caution was lit at 10,000 feet; changed to
27,000 per the dash one for this version). All other ECS
functions such as external fuel tank pressurization are
unaffected. This command only operates if realistic
avionics are selected.
SimAirSourceRam Refers to the air source selection control knob on the AIR
COND panel. This command places the knob in the RAM
position. Engine bleed air valves close. Cabin
pressurization is terminated and the cabin is vented to
outside air pressure. This means cockpit pressure altitude
will increase above 8,000 feet MSL. The CABIN PRESS
caution will illuminate if cockpit pressure altitude exceeds
27,000 feet (NB: in previous versions of Falcon4, the
caution was lit at 10,000 feet; changed to 27,000 per the
dash one for this version). RAM air valves are opened to
ventilate the cockpit and avionics. All other ECS functions
such as external fuel tank pressurization are disabled. This
command only operates if realistic avionics are selected.
SimDecLeftAuxComDigit SP3 command, although not present in the default
keystrokes.key file.
SimDecCenterAuxComDigit SP3 command, although not present in the default
keystrokes.key file.
SimDecRightAuxComDigit SP3 command, although not present in the default
keystrokes.key file.
142