User manual

F4-BMS 2.0 Technical Manual
SimInteriorLight SP3 command. Not previously listed in the default .key file
however.
SimInstrumentLight SP3 command.
SimSpotLight SP3 command.
SimRwrPower SP3 command, although not present in the default
keystrokes.key file.
SimCycleLeftAuxComDigit
SimCycleCenterAuxComDigit
SimCycleRightAuxComDigit
SimCycleBandAuxComDigit
SimToggleAuxComMaster
SimToggleAuxComAATR
SimTACANTR Refers to the TACAN domain selection switch on the AUX
COMM panel. This command places the switch in the TR
position. TACAN channels refer to ground stations only.
Note that the game only implements two positions for this
switch; there is no separate functionality for the REC
(receive only) position. This command only operates if
realistic avionics are selected.
SimTACANAATR Refers to the TACAN domain selection switch on the AUX
COMM panel. This command places the switch in the TR
position. TACAN channels refer to air stations only. Note
that the game only implements two positions for this switch;
there is no separate functionality for the REC (receive only)
position. This command only operates if realistic avionics
are selected.
SimToggleUHFMaster In SP3 this command erroneously changed the source of
radio channel programming from the UFC to the backup
controls on the UHF panel. BMS corrects this problem and
now the selection of input controls for UHF channel
selection is made via the CNI switch on the AUX COMM
panel as per the real system.
SimTransmitCom1 SP2 command.
SimTransmitCom2 SP2 command.
143